2-component acid-resistant epoxy mortar for the installation and grouting of ceramic tiles with joints of 1 to 15 mm width (3/64 in. to 19/32 in.)
Suitable for the acid-resistant installation and grouting of ceramic tiles and mosaics with 1 to 15 mm wide joints， on indoor and outdoor floors and walls; suitable for applications where the surfaces are exposed to aggressive chemical substances (see chemical resistance table) such as dairies， abattoirs， pubs， food factories in general
When installing epoxy grout make sure to follow directions and use the proper tools listed in the instruction manual; mix the 2 parts with a small mixer on a drill at a low speed as to not heat up the grout but to mix it thoroughly; also use a green float that is for epoxy grout only
Mixture life: approximately 1 hour at T = +23°C (73.4°F) recommended application temperature: recommended between +18°C to +23°C (64.4°F to +73.4°F) walkable after: 24 hours at T= +23°C (73.4°F); the surface can be commissioned after 7 days at a temperature of +23°C (73.4°F); at temperatures between +8°C and +12°C (46.4°F to 53.6°F)， the product is highly consistent and difficult to apply
Great for grouting swimming pools or pools containing spring water; please see the Technical Data Sheet (TDS) for all fields of application
Recommended: Use Tile Doctor Green Epoxy Float for best results when grouting tile with epoxy - based grout.
Suitable for laying and grouting floors and walls in: bathrooms， shower cubicles， swimming pools， thermal baths， saunas， Turkish baths
White scrub pads included sized at 4 1/2 x 5
Comment